Cp-electronics VITP-MWS3A Uživatelský manuál stáhnout pdf

LOAD See datasheet for VitessePlus marshalling box

SUPPLY VOLTAGE 12VDC

TIME OUT PERIOD Adjustable 10 seconds to 99 minutes

LIGHT LEVEL Light to dark

FIXING METHOD Spring fixing, or surface fixing using additional Part No. MWS3A-DBB

(Surface mounting box)

MATERIAL Flame retardant ABS

TYPE Class 2

TEMPERATURE -10°C to 35°C

CONFORMITY EMC-89/336/EEC

LVD-73/23/EEC

VITP-MWS3A VitessePlus microwave presence detector

MWS3A-DBB Surface mounting box

VITP-MB VitessePlus marshalling box (non-dimming)

VITP-MBDSI VitessePlus dimming marshalling box DSI (digital dimming)

VITP-MBDALI VitessePlus dimming marshalling box DALI (digital dimming)

VITP-MBD VitessePlus dimming marshalling box 1-10V (analogue dimming)

UHS User handset with on/off override and lux up / lux down adjustment

UHS3 User handset with on/off override and cancel only

UHS3/2 User handset with off override and cancel only

DD-LCDHS IR remote control programming handset with LCD

screen

11. Specification

12. Part Numbers

LIGHTS DO NOT COME ON

Check to see if the Vitesse Plus marshalling

box is powered up and the wiring is correct.

Disconnect both RJ45 connections on the Cat

5 patch lead and re-connect, ensuring that

they ―click‖ into position, making good

connection.

Check that the ―lux hold off‖ setting is not

keeping the lights off because there is

sufficient ambient light.

If the detection range is smaller than

expected, check the diagram on page 11.

If the LED is flashing at regular intervals, this

shows that the detector is being overridden.

Press the cancel button on the handset.

LIGHTS DO NOT GO OFF

Ensure that the area is left unoccupied for

longer than the selected timer setting.

Make sure that the sensor is not adjacent to

circulating air, heaters or lamps.

If the LED is flashing at regular intervals, this

shows that the detector is being overridden

on. Press the cancel button on the handset.

10. Fault finding

Ref %WD307 Issue 2

C.P. Electronics Ltd

Brent Crescent

London

NW10 7XR

United Kingdom

Tel: + 44 (0) 333 900 0671

Fax: + 44 (0) 333 900 0674

www.cpelectronics.co.uk

enquiry@cpelectronics.co.uk

IMPORTANT NOTICE!

This device should be installed by a qualified electrician in

accordance with the latest edition of the IEE wiring regulations.

Due to our policy of continual product improvement CP Electronics reserves the right

to alter the specification of this product without prior notice.

FM 45789 EMS 534520

Section Contents Page

1 Dimensional information 1

2 Description and operation 2

3 Fixing and wiring 3

4 Fixing - Flush 4

5 Fixing - surface 4

6 Head locking 5

7 Time, lux & sensitivity adjusters 5

8 Programming 6

9 Detection pattern diagrams 11

10 Fault finding 12

11 Specification 12

Part numbers

1. Dimensions

MWS3A-DBB sold separately

Contents

Dimming Ceiling Mounted MicrowavePresence Detector

Product Guide

VITP-MWS3A

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - VITP-MWS3A

12 LOAD See datasheet for VitessePlus marshalling box SUPPLY VOLTAGE 12VDC TIME OUT PERIOD Adjustable 10 seconds to 99 minutes LIGHT LEVEL Lig

Strany 2 - 9. Detection Patterns

2 The VITP-MWS3A microwave presence detector switches are designed to provide automatic control of lighting loads via the VitessePlus marshalling bo

Strany 3 - 3. Fixing & Wiring

10 User menu functions with dimming applications Using the Programming Handset (Part No. DD-LCDHS) 5. Press and hold the left arrow key. On the main

Strany 4 - 1 4 3 2

4 Warning - be careful bending springs when mounting unit. Warning - be careful bending springs when mounting unit. 4. Fixing - Flush 5. Fixing -

Strany 5 - 6. Head Locking

8 8. Programming (continued) 2. Lux switching on all channels covered by one sensor Press and hold the left arrow key. On the main menu (―Detector

Strany 6 - 8. Programming

6 USING AS A DIMMER When the lighting is switched, the light level can be manually adjusted on a temporary basis. Set the level using the LUX UP and

Další dokumenty pro Relé Cp-electronics VITP-MWS3A

Zobrazit dokument Cp-electronics VITP-MWS3A Uživatelský manuál

Cp-electronics VITP-MWS3A Uživatelský manuál (8 stránky)

Komentáře k této Příručce

Žádné komentáře

Cp-electronics VITP-MWS3A Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Relé Cp-electronics VITP-MWS3A. CP Electronics VITP-MWS3A User Manual Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Relé Cp-electronics VITP-MWS3A

Komentáře k této Příručce

Související produkty a manuály pro Relé Cp-electronics VITP-MWS3A